Specifications:

Power: 1000W

Input: 110V/240V 50-60HZ

Output: 10.8V-12.8V

Battery capacity: 15000mAh

Lithium battery capacity: 88VF

Charging time: 1-2H

Working hours: > 8H

Vibration frequency: 12000r/min

Gear: 5th gear

Adsorption strength: 100Kg

Suction cup diameter: 12cm/4.7"

Suitable for ceramic tile: 1200x1200mm

Product size: 12x32cm/4.7"x12.6"

Head material: aluminum magnesium alloy, stainless steel

Use: decoration team, decoration project

Application: Tile wall tile

Instructions for use:

1, please check the battery before use to ensure that the battery power is sufficient;

2, turn the inverter switch to the left to the minimum, and then start according to the requirements to adjust to the appropriate state;

3. Place the machine on the tile to be laid, and the suction cup will absorb the tile. Press the switch and the machine starts to work, flattening the protruding part of the tile instantly.

4, when working, be sure to hold the suction cup to work on the tile, do not let the machine idling, do not always press the switch during the paste process, there is a rhythm is more conducive to paving.

Charging instructions:

1. After receiving the machine, press the switch to adjust whether the frequency switch works. If the indicator light on the machine is not on, please charge it before normal use. When the charger is connected and charged, the charging indicator on the charger will light up.

2, the product is normally charged for 3-4 hours, full of automatic stop, the indicator light is green or not bright.

3, the product can work for more than 8 hours after full charge, but in order not to affect the service life of the product, please charge it every day during normal use.

4. When using this product normally, it needs to be charged once a day, if not once a month.